
Technical Summary & Field Standards
Grout depends on tile size, joint width and tile thickness. The formula, a chart in pounds per 100 sq ft, and why small tiles and wide joints take far more grout.
Grout volume = joint length × joint width × tile thickness. For 12 × 12 in tile, 3/8 in thick with 1/8 in joints, that’s about 9 lb of sanded grout per 100 sq ft, so a 25 lb bag covers roughly 267 sq ft. Small tiles and wide joints need much more: a 2 × 2 in mosaic takes about four times as much grout per square foot as 12 × 12 tile.
The formula
Grout fills the joints to the depth of the tile. Per square foot of floor:
- Joint length (in inches) = 144 × (tile width + tile length) ÷ (tile width × tile length). For 12 × 12 tile that’s 24 in of joint per square foot.
- Volume = joint length × joint width × tile thickness. 24 × 1/8 × 3/8 = 1.125 cubic inches per square foot.
- Weight: we assume one pound of dry sanded cement grout fills about 12 cubic inches of joint once mixed. That’s the low end of typical values, so our estimates lean toward a little extra.
Pounds per 100 sq ft
No waste added:
| Tile | Thickness | 1/16 in joint | 1/8 in joint | 3/16 in joint |
|---|---|---|---|---|
| 2 × 2 in mosaic | 1/4 in | 18.8 | 37.5 | 56.3 |
| 3 × 6 in subway | 5/16 in | 11.7 | 23.4 | 35.2 |
| 12 × 12 in | 3/8 in | 4.7 | 9.4 | 14.1 |
| 12 × 24 in | 3/8 in | 3.5 | 7 | 10.5 |
| 24 × 24 in | 3/8 in | 2.3 | 4.7 | 7 |
| 6 × 36 in plank | 3/8 in | 5.5 | 10.9 | 16.4 |
Square feet per 25 lb bag
| Tile | 1/16 in joint | 1/8 in joint | 3/16 in joint |
|---|---|---|---|
| 2 × 2 in mosaic | 133 | 67 | 44 |
| 3 × 6 in subway | 213 | 107 | 71 |
| 12 × 12 in | 533 | 267 | 178 |
| 12 × 24 in | 711 | 356 | 237 |
| 24 × 24 in | 1,067 | 533 | 356 |
| 6 × 36 in plank | 457 | 229 | 152 |
Why the huge spread? Joint length per square foot depends on how many tiles there are. A square foot of 2 × 2 mosaic has 144 in of joint; a square foot of 24 × 24 tile has 12 in. Joint width scales the result directly, so going from 1/16 to 3/16 in triples the grout.
Worked example: a bathroom
- Floor: 40 sq ft of 12 × 24 in porcelain, 3/8 in thick, 1/8 in joints, 10% extra: about 3.1 lb, one 25 lb bag with plenty left over.
- Shower walls: 75 sq ft of 3 × 6 in subway tile, 5/16 in thick, 1/16 in joints, 10% extra: about 9.7 lb. That’s 1 bag of 10 lb unsanded grout, since joints under 1/8 in usually call for unsanded.
You can also run tile counts in the tile calculator; for how many boxes of tile to buy, see how many tiles are in a box.
Sanded or unsanded?
- Unsanded grout for joints narrower than about 1/8 in, and for polished stone or glass tile that sand could scratch.
- Sanded grout for joints about 1/8 in and wider. The sand keeps it from shrinking and cracking in wider joints.
- Epoxy and urethane grouts for showers and kitchens where stain resistance matters. They cost more and cover differently.
Always check the grout maker’s stated joint-width range.
Tips
- Mix in small batches. Cement grout has a limited working time. Mix what you can use in 20 to 30 minutes.
- Buy one color lot. Grout color varies between batches, just like tile.
- Keep a little extra for repairs. A small bag of the same color makes future fixes invisible.