Skip to content
Material Guides
Brick and block Technical Analysis

How Many Bricks per Square Foot? Modular, Queen and King

By Eren ŞimşirPublished Peer Reviewed

How Many Bricks per Square Foot? Modular, Queen and King technical diagram and material reference
Field Blueprint • Brick and block calculator
Technical Field Diagram & Code GuidelinesOpen Brick and block calculator →
✓

Technical Summary & Field Standards

About 6.75 modular bricks cover a square foot of wall with 3/8 inch joints. Bricks per sq ft for common sizes, the math behind it and wall examples.

Verified IRC Specifications·Reviewed by Eren Şimşir
Calculate your project values →

A square foot of wall takes about 6.75 modular bricks with standard 3/8 inch mortar joints, according to the Brick Industry Association. Queen bricks are about 5.5 per square foot, king bricks about 4.55 and utility bricks 3. Add at least 5% for breakage and cutting.

Bricks per square foot by size

BrickPer sq ftPer 100 sq ftWith 5% extraMortar per 1,000 (cu ft)
Modular brick (7 5/8 × 2 1/4 in)6.756757098.1
Queen brick5.555057812.2
King brick4.5545547814.2
Utility brick330031512.3
Single wythe, 3/8 in joints. From BIA Technical Note 10, Dimensioning and Estimating Brick Masonry.

Where 6.75 comes from

A modular brick is specified as 7 5/8 × 2 1/4 in on its face. Add a 3/8 in joint to the length and height and each brick occupies 8 × 2 5/8 in of wall: 21 square inches. A square foot is 144 square inches, so 144 ÷ 21 = 6.86 bricks. BIA’s tables round to 6.75 per square foot, which is the figure most estimators use. Wider joints mean fewer bricks; thinner joints mean more.

Bricks for common walls

Modular brick, one wythe, with 5% extra and mortar from the BIA figures plus 20%:

WallSq ftBricks80 lb bags of mortar mix
10 × 3 ft302137
20 × 3 ft6042614
20 × 4 ft8056718
30 × 6 ft180127640
40 × 8 ft320226871
Mortar bags converted using QUIKRETE's figure of up to 37 standard bricks per 80 lb bag of Mason Mix.

The brick and block calculator subtracts doors and windows and switches between brick sizes and concrete block.

Worked example: brick veneer on a wall

A 40 ft wall, 8 ft tall, with one door and three windows:

  1. Gross area: 40 × 8 = 320 sq ft.
  2. Openings: 21 + 3 × 15 = 66 sq ft, leaving 254 sq ft.
  3. Bricks: 254 × 6.75 = 1,715, plus 5% = 1801.
  4. Mortar: 16.66 cu ft with 20% extra, about 56 bags of 80 lb mix.

Real windows vary a lot in size; measure yours rather than relying on the 15 sq ft average.

What the count doesn’t include

  • Rowlocks, soldiers and sills. Bricks laid on edge or end use more bricks per square foot of face.
  • Corners and returns. Count both faces of a corner.
  • Double walls. A two-wythe wall needs twice the bricks plus ties or header courses.
  • Ties, flashing and weeps for veneer, which the building code governs.

Wall Ties and Cavity Airspace Code Requirements

When estimating exterior brick veneer anchored to wood or steel framing, brick count is only half the material specification. Building codes (IRC Section R703.8) strictly enforce moisture drainage and anchoring hardware:

  • 1-Inch Clear Airspace: Never lay brick veneer directly against wood sheathing. Building codes mandate a minimum 1-inch continuous drainage cavity between the back of the brick and the weather-resistive barrier (housewrap). This gap prevents wind-driven rain from bridging into interior wall framing.
  • Corrugated Wall Ties: Fasten 22-gauge galvanized metal veneer ties into wood studs using hot-dipped galvanized ring-shank nails or exterior screws. Space ties so that each tie supports no more than 2.67 square feet of wall area (maximum spacing: 16 inches vertically and 24 inches horizontally on center). For every 1,000 modular bricks, purchase approximately 375 to 400 corrugated wall ties.
  • Base Flashing and Weep Holes: Water inevitably penetrates porous brick and mortar joints. Install self-adhering membrane flashing extending 8 inches up the backup sheathing and across the concrete foundation ledge. Place open head-joint weep vents or cotton rope wicks every 24 inches on center directly above the flashing ledge to let drained moisture escape.

Buying tips

  • Buy from one production run. Brick color varies between runs, so order enough at once and blend from several pallets as you lay.
  • Ask about pallet quantities. Brick is usually sold by the pallet or banded “cube” containing between 500 and 530 modular bricks (approx. 75 to 78 square feet of wall area per cube). Partial cubes often carry surcharge restocking fees.

For customizable wall dimensions, openings, and mortar estimates, use our brick calculator.