Technical Summary & Field Standards
Calculate how many retaining wall blocks you need with our step-by-step formula, including buried courses, capstones, geogrid, gravel base, and a 10% waste.
To calculate the number of retaining wall blocks needed, determine the total face area of the wall (length x height), divide by the face area of a single block, and add one full course for the buried starter layer. Account for capstones separately by dividing the wall’s linear length by the capstone’s length. Always include a 10% waste factor for cuts and breakage, and estimate gravel and geogrid based on wall dimensions and manufacturer specifications.
Accurate material estimation for retaining walls requires more than just a simple area calculation. Factors like the essential buried starter course, distinct capstone dimensions, the volume of gravel for a stable base, and the linear footage of geogrid reinforcement for taller walls significantly impact the final material count. This guide provides the precise formulas and a comprehensive table to ensure a successful project.
How the Formula Works
Estimating retaining wall materials involves calculating the quantity of standard blocks, capstones, gravel for the base, and geogrid reinforcement. Each component requires a specific approach to ensure accuracy.
-
Standard Retaining Wall Blocks:
- Total Wall Face Area (sq ft): Multiply the wall’s total length (in feet) by its exposed height (in feet).
- Single Block Face Area (sq ft): Convert the block’s length and height from inches to feet, then multiply them. For example, a 16-inch long x 6-inch high block has a face area of (16/12) ft * (6/12) ft = 1.333 ft * 0.5 ft = 0.6665 sq ft.
- Blocks per Square Foot: Divide 1 by the single block face area. (e.g., 1 / 0.6665 sq ft = 1.5 blocks/sq ft).
- Initial Block Count: Multiply the total wall face area by the blocks per square foot.
- Buried Starter Course: Add one full course of blocks to the initial count. This course is typically buried below grade for stability and is not part of the exposed height calculation. Calculate this by dividing the total wall length by the block length (in feet).
- Total Standard Blocks: Sum the initial block count and the buried starter course blocks.
- Waste Allowance: Add 10% to the total standard blocks for cuts, breakage, and future repairs.
-
Capstones:
- Linear Feet of Capstones: This is simply the total length of the wall (in feet).
- Single Capstone Length (ft): Convert the capstone’s length from inches to feet (e.g., a 12-inch long capstone is 1 ft).
- Capstones Needed: Divide the linear feet of capstones by the single capstone length.
- Waste Allowance: Add 10% to the capstone count.
-
Gravel Base:
- Trench Dimensions: Determine the desired width and depth of the gravel base. A common recommendation is 18 inches wide and 6 inches deep for a typical residential wall.
- Volume per Linear Foot (cu ft): Multiply the trench width (in feet) by the trench depth (in feet) by 1 linear foot. (e.g., (18/12) ft * (6/12) ft * 1 ft = 1.5 ft * 0.5 ft * 1 ft = 0.75 cu ft/linear ft).
- Total Gravel Volume (cu ft): Multiply the volume per linear foot by the total wall length (in feet).
- Convert to Cubic Yards: Divide the total cubic feet by 27 (since 1 cubic yard = 27 cubic feet).
- Waste Allowance: Add 10% to the total gravel volume.
-
Geogrid Reinforcement:
- Geogrid Spacing: Consult the block manufacturer’s specifications or local building codes. For walls over 3-4 feet, geogrid is typically installed every 2-3 courses.
- Number of Geogrid Layers: Divide the total wall height (including the buried course) by the geogrid spacing (in feet), then round up to the nearest whole number.
- Total Geogrid Length (linear feet): Multiply the number of geogrid layers by the total wall length (in feet). Geogrid typically comes in rolls of specific widths (e.g., 4 ft, 6 ft). Ensure the calculated length accounts for the required embedment depth behind the wall.
- Waste Allowance: Add 10% to the total geogrid length.
For more complex projects or specific block types, consider using a dedicated brick calculator to streamline these calculations.
Material Estimation Table
The following table provides common dimensions and calculation factors for typical retaining wall blocks and materials. Dimensions are nominal; always verify actual block sizes from your supplier.
| Material Type | Nominal Dimensions (L x D x H) | Actual Face Area (sq ft) | Blocks/Capstones per sq ft / linear ft | Gravel Volume per Linear Foot (cu ft) |
|---|---|---|---|---|
| Standard Retaining Wall Block | 16" x 8" x 6" | 0.6665 (16" L x 6" H) | 1.5 blocks/sq ft | - |
| Standard Retaining Wall Block | 12" x 8" x 4" | 0.333 (12" L x 4" H) | 3.0 blocks/sq ft | - |
| Capstone (Standard) | 12" x 8" x 3" | - | 1.0 capstone/linear ft | - |
| Capstone (Large) | 16" x 10" x 4" | - | 0.75 capstone/linear ft | - |
| Gravel Base (for 18" W x 6" D trench) | - | - | - | 0.75 cu ft/linear ft |
| Geogrid (per layer, for 4 ft embedment) | - | - | 4 linear ft per linear ft of wall | - |
Worked Project Example
Let’s estimate materials for a retaining wall that is 20 feet long and 3 feet exposed height, using standard 16” L x 8” D x 6” H blocks and 12” L x 8” D x 3” H capstones. We’ll assume a 6-inch deep gravel base and geogrid every 2 courses for stability.
1. Standard Retaining Wall Blocks:
- Exposed Wall Face Area: 20 ft (length) * 3 ft (height) = 60 sq ft.
- Blocks per Square Foot (from table): 1.5 blocks/sq ft.
- Initial Block Count: 60 sq ft * 1.5 blocks/sq ft = 90 blocks.
- Buried Starter Course: 20 ft (length) / (16/12 ft per block) = 20 ft / 1.333 ft = 15 blocks.
- Subtotal Standard Blocks: 90 + 15 = 105 blocks.
- With 10% Waste: 105 blocks * 1.10 = 115.5 blocks. Round up to 116 standard blocks.
2. Capstones:
- Linear Feet of Capstones: 20 ft.
- Capstones per Linear Foot (from table): 1.0 capstone/linear ft.
- Subtotal Capstones: 20 ft * 1.0 capstone/linear ft = 20 capstones.
- With 10% Waste: 20 capstones * 1.10 = 22 capstones. Round up to 22 capstones.
3. Gravel Base:
- Trench Dimensions: 18 inches wide (1.5 ft) x 6 inches deep (0.5 ft).
- Gravel Volume per Linear Foot (from table): 0.75 cu ft/linear ft.
- Total Gravel Volume (cu ft): 20 ft (length) * 0.75 cu ft/linear ft = 15 cu ft.
- Convert to Cubic Yards: 15 cu ft / 27 cu ft/yard = 0.555 cubic yards.
- With 10% Waste: 0.555 cubic yards * 1.10 = 0.61 cubic yards. Round up to 0.75 cubic yards (or 1 cubic yard to be safe, as suppliers often sell in full or half-yard increments).
4. Geogrid Reinforcement:
- Total Wall Height (including buried course): 3 ft (exposed) + 0.5 ft (buried course height, assuming 6” block) = 3.5 ft.
- Geogrid Spacing: Every 2 courses. Since blocks are 6” high, 2 courses = 12” or 1 ft spacing.
- Number of Geogrid Layers: 3.5 ft (total height) / 1 ft (spacing) = 3.5 layers. Round up to 4 layers.
- Total Geogrid Length (assuming 4 ft embedment): 4 layers * 20 ft (wall length) * 4 ft (embedment) = 320 sq ft. If geogrid is sold by linear foot of roll (e.g., 4 ft wide roll), then 4 layers * 20 ft = 80 linear feet of 4 ft wide geogrid roll.
- With 10% Waste: 80 linear feet * 1.10 = 88 linear feet. Round up to 90 linear feet of 4 ft wide geogrid.
Summary of Materials for a 20 ft long, 3 ft high wall:
- Standard Retaining Wall Blocks: 116
- Capstones: 22
- Gravel Base: 1 cubic yard
- Geogrid (4 ft wide): 90 linear feet
Setting Tips and Waste Allowance
A 10% waste allowance is a critical buffer for any construction project, especially with retaining walls. Blocks can chip or break during transport, handling, or cutting. It is always better to have a few extra blocks on hand than to halt a project waiting for a small reorder.
Proper base preparation is paramount for a stable retaining wall. The trench for the gravel base should be excavated to a depth that accommodates the gravel layer and the buried starter course, ensuring the first course is fully below grade. This depth helps prevent the wall from shifting or settling. For detailed guidance on excavation and base stability, refer to resources like the Concrete Slab Thickness Guide: Patio, Driveway, Shed, Garage. The gravel base itself must be compacted thoroughly and perfectly level to provide a uniform foundation for the first course of blocks.
Geogrid reinforcement is essential for taller walls (typically over 3-4 feet) or walls supporting significant loads. It is laid horizontally between courses and extends back into the compacted soil behind the wall, creating a reinforced soil mass that resists lateral pressure. Always follow the manufacturer’s guidelines for geogrid type, spacing, and embedment length to ensure structural integrity.